You are here

Home

PUBLICATIONS

JOURNAL PUBLICATIONS:

  1.  A Yousefiani, F. A. Mohamed, and J. C. Earthman, "Multiaxial Creep Rupture in Annealed and Overheated 7075 Al," Metallurgical and Materials Transactions A, 31A, 2807-2822 (2000).
  2.  T. Savas and J. C. Earthman, "Fatigue and Stress Analysis of a Novel Test Coupon Geometry Developed for Hydraulic Pressure Impulse Testing," Journal of Testing and Evaluation, 28, 359-366 (2000).
  3.  Kh. Ismail, A. Jayaraman, T. K. Wood, and J. C. Earthman, "The Influence of Bacteria on the Passive Film Stability of 304 Stainless Steel," Electrochimica Acta, 44,4685-4692 (1999).
  4.  V. Bystritskii, E. Garate, J. Earthman, A. Kharlov, E. Lavernia, and X. Peng, "Fatigue Properties of 2024-T3, 7075-T6 Aluminum Alloys Modified using Plasma-Enhanced Ion Beams," Theoretical and Applied Fracture Mechanics, 32, 47-53 (1999).
  5.  A Yousefiani, J. C. Earthman, and F. A. Mohamed, "Formation of Cavity Stringers During Superplastic Deformation," Acta Materialia, 46, 3557-3570 (1998).
  6.  A. Chakraborty and J. C. Earthman, "Finite Element Analysis of Cavitating Facet Interaction in a Fully Lamellar Titanium Aluminide Alloy Under Creep Conditions," Metallurgical and Materials Transactions A., 29A, 957-964 (1998).
  7.  G. F. Eggeler and J. C. Earthman, "Dislocation Fiber Interactions in Short Fiber Reinforced Metal Matrix Composites During Creep and During Thermal Cycling," Scripta Materialia, 38, 341-348 (1998).
  8.  A. Chakraborty and J. C. Earthman, "Numerical Models of Creep Cavitation in Single Phase, Dual Phase and Fully Lamellar Titanium Aluminide," Acta Materialia, 45, 4615-4626 (1997).
  9.  B. Li, J. Wolfenstine, J. C. Earthman, E. J. Lavernia, "Compressive Creep Behavior of Spray-Formed Gamma Titanium Aluminide," Metallurgical and Materials Transactions A, 28A, 1849-1857 (1997).
  10.  K. J. C. Chou and J. C. Earthman, "Characterization of Low-Cycle Fatigue Damage in Inconel 718 by Laser Light Scattering," Journal of Materials Research, 12, 2048-2056 (1997).
  11.  A. Jayaraman, E. T. Cheng, J. C. Earthman, and T. K. Wood, "Axenic Aerobic Biofilms Inhibit Corrosion of SAE 1018 Steel through Oxygen Depletion," Applied Microbiology and Biotechnology, 48, 11-7 (1997).
  12.  A. Jayaraman, E. T. Cheng, J. C. Earthman, and T. K. Wood, "Importance of Biofilm Formation for Corrosion Inhibition of SAE 1018 steel by Axenic Aerobic Biofilms," Journal of Industrial Microbiology and Biotechnology, 18, 396-401 (1997).
  13.  A. Chakraborty and J. C. Earthman, "Numerical Models of Creep and Boundary Sliding Mechanisms in Single Phase, Dual Phase and Fully Lamellar Titanium Aluminide," Metallurgical and Materials Transactions A, 28A, 979-989 (1997).
  14.  W. E. Churley and J. C. Earthman, "High Temperature Crack Growth in 304 Stainless Steel under Mixed-Mode Loading Conditions," Metallurgical and Materials Transactions A, 28A, 763-773 (1997).
  15.  A. Jayaraman, J. C. Earthman, and T. K. Wood, "Corrosion Inhibition by Aerobic Biofilms on SAE 1018 Steel," Applied Microbiology and Biotechnology, 47, 62-68 (1997).
  16.  C. G. Sheets and J. C. Earthman, "Tooth Intrusion in Implant-Assisted Prostheses," Journal of Prosthetic Dentistry, 77, 39-45 (1997).
  17.  A.-B. A. El-Nasr, F. A. Mohamed, and J. C. Earthman, "High Temperature Rupture of a SiC Particulate Reinforced Al Composite Under Multiaxial Stress States," Materials Science and Engineering, A214, 33-41 (1996).
  18.  X. -G. Jiang, S. T. Yang, J. C. Earthman, and F. A. Mohamed, "Effect of Fe on Ductility and Cavitation in the Superplastic Zn-22 Pct Al Eutectoid," Metallurgical and Materials Transactions, 27A, 863-872 (1996).
  19.  B. Li, X. Liang, J. C. Earthman, and E. J. Lavernia, "Two Dimensional Modeling of Momentum and Thermal Behavior During Spray Atomization of ?-TiAl," Acta Materialia , 44, 2409-2420 (1996).
  20.  W. E. Churley and J. C. Earthman, "Damage Mechanics Approach for Predicting High Temperature Crack Growth under Mixed-Mode Conditions," Materials Science and Engieering, A202, 36-42 (1995).
  21. P. A. Schmidt, R. R. Blair, and J. C. Earthman, "Development of a Novel Specimen Geometry for Corrosion Fatigue Testing of Fine Wire," Journal of Testing and Evaluation, JTEVA, 23, 73-79 (1995).
  22. P. A. Schmidt and J. C. Earthman, "Development of a Scanning Laser Crack Detection Technique for Corrosion Fatigue Testing of Fine Wire," Journal of Materials Research, 10, 372-380 (1995).
  23.  J. Wolfenstine, H. K. Kim, and J. C. Earthman, "Elevated-Temperature Deformation Mechanisms in Ni3Al," Materials Science and Engineering, A192/193, 811-816 (1994).
  24.  K. L. Murty, B. V. Tanikella, and J. C. Earthman, "Effect of Grain Shape and Texture on Equi- Biaxial Creep of Stress Relieved and Recrystallized Zircaloy-4," Acta Metallurgica et Materialia, 42, 3653-3662 (1994).
  25.  X. Jiang, J. C. Earthman, and F. A. Mohamed, "Cavity Nucleation and Cavity-Induced Fracture During Superplastic Deformation," Journal of Materials Science, 29, 5499-5514 (1994).
  26.  J. C. Earthman, K. L. Murty, B. V. Tanikella, and J. C. Britt, "Effects of Grain-Shape Anisotropy and Texture on Balanced-Biaxial Creep of Ti and Zr Alloys," JOM, 46, No. 10, 48-54 (1994).
  27.  D. A. Brenner and J. C. Earthman, "Novel Instrumentation for Quantitative Determination of Energy Damping in Materials and Structures," Scripta Metallurgica et Materialia, 31, 467-471 (1994).
  28.  K.-T. Park, J. C. Earthman and F. A. Mohamed, "Microstructure and Cavitation in the Superplastic Zn-22% Al Alloy: Effect of Solution Heat Treatment," Philosophical Magazine Letters, 70, pp. 7-13 (1994).
  29.  J. Wolfenstine, H. K. Kim and J. C. Earthman, "Creep Characteristics of Single Crystalline Ni3Al(Ta,B)" Metallurgical Transactions, 25A, 2477-2482 (1994).
  30.  K. -T. Park, S. T. Yang, J. C. Earthman, and F. A. Mohamed, "The Effect of Impurities on Ductility and Cavitation in the Superplastic Zn-22% Al Alloy," Materials Science and Engineering, A188, 59-67 (1994).
  31.  S. Yan, J. C. Earthman, and F. A. Mohamed, "Effect of Cd on Superplastic Flow in the Pb- 62%Sn Eutectic," Philosophical Magazine, A69, 1017-1038 (1994).
  32.  N. L. Johnson and J. C. Earthman, "Numerical Analysis of Primary Creep Deformation in a Novel Double Shear Specimen Geometry," Journal of Testing and Evaluation, JTEVA, 22, 111-116 (1994).
  33.  R. W. Hayes, D. F. Smith, E. A. Wanner and J. C. Earthman, "The Effect of Environment on the Rupture Behavior of Alloys 909 and 718," Materials Science and Engineering, A177, 43-51 (1994).
  34.  C. G. Sheets and J. C. Earthman, "Natural Tooth Intrusion and Reversal in Implant Assisted Prosthesis-Evidence of and a Hypothesis for the Occurrence," Journal of Prosthetic Dentistry, 70, 513-520 (1993).
  35.  M. Gupta, K. Bowo, E. J. Lavernia and J. C. Earthman, "Effect of Particulate Type on Fatigue Crack Propagation in Al-Li Based Spray Deposited Metal Matrix Composites," Scripta Metallurgica et Materialia, 28, 1053-1058 (1993).
  36.  H. K. Kim and J. C. Earthman, "High Temperature Deformation and Fracture Mechanisms in a Dendritic Ni3Al Alloy," Acta Metallurgica et Materialia, 42, 679-688 (1994).
  37.  J. Wolfenstine, H. K. Kim and J. C. Earthman, "High Temperature Creep Transitions in Single Crystalline Ni3Al(Ta,B)" Journal of Materials Research, 8, 2510-2514 (1993).
  38.  H. K. Kim, J. Wolfenstine and J. C. Earthman, "Grain Boundary Sliding in Ni3Al(Ta,B) Bicrystals," Scripta Metallurgica et Materialia, 27, 1067-1072 (1992).
  39.  X. Liang, H. K. Kim, J. C. Earthman and E. J. Lavernia, "Microstructure and Elevated Temperature Behavior of a Spray-Atomized and Co-Deposited Ni3Al/SiC/TiB2 Intermetallic Matrix Composite," Materials Science and Engineering, A153, 646-653 (1992).
  40.  H. K. Kim, J. C. Earthman and E. J. Lavernia, "Primary Dendrite Arm Spacings and Tip Radii in Directionally Solidified Ni3Al," Materials Science and Engineering, A152, 240- 246 (1992).
  41.  J. Wolfenstine, H. K. Kim and J. C. Earthman, "High Temperature Creep Behavior of Polycrystalline Ni3Al (Zr, B)," Scripta Metallurgica et Materialia, 26, 1823-1828 (1992).
  42.  X. Liang, J. C. Earthman and E. J. Lavernia, "On the Mechanism of Grain Formation During Spray Atomization and Deposition," Acta Metallurgica et Materialia, 40, 3003-3016 (1992).
  43.  J. Buerkle, D. Dunn-Rankin, K. Bowo and J. C. Earthman, "Rapid Defect Detection by Laser Light Scattering," Materials Evaluation, 50, 670-677 (1992).
  44.  H. K. Kim, E. J. Lavernia and J. C. Earthman, "Mechanisms of Intergranular Cavity Growth in Ni3Al (Zr, B)," Acta Metallurgica et Materialia, 40, 1933-1943 (1992).
  45.  H. K. Kim, J. C. Earthman and E. J. Lavernia, "Directional Solidification of Ni3Al," Acta Metallurgica et Materialia, 40, 637-647 (1992).
  46.  X. Liang, J. C. Earthman, J. Wolfenstine and E. J. Lavernia, "A Comparison of Techniques for Determining the Volume Fraction of Particulates in Metal Matrix Composites," Materials Characterization, 28, 173-178 (1992).
  47.  H. K. Kim, F. A. Mohamed and J. C. Earthman, "High Temperature Rupture of Microstructurally Unstable 304 Stainless Steel Under Uniaxial and Triaxial Stress States," Metallurgical Transactions, 22A, 2629-2635 (1991).
  48.  J. C. Earthman, "Characterization of Small Crack Growth in 12% Cr Mo V Steel Under High Temperature, Low Cycle Fatigue Conditions," Materials Science and Engineering, A132, 89-95 (1991).
  49.  H. K. Kim, F. A. Mohamed and J. C. Earthman, "A Novel Specimen Geometry for Double Shear Experiments," Journal of Testing and Evaluation, JTEVA, 19, 93-96 (1991).
  50.  C. Wiesner, J. C. Earthman, G. Eggeler and B. Ilschner, "Creep Crack Growth and Cavitation Damage in a 12% Cr Steel," Acta Metallurgica, 37, 2733-2741 (1989).
  51.  J. C. Earthman, G. Eggeler and B. Ilschner, "Deformation and Damage Processes in a 12% Cr Steel under High Temperature Low-Cycle Fatigue Conditions in Air and Vacuum," Materials Science and Engineering, A110, 103-114 (1989).
  52.  W. D. Nix, J. C. Earthman, G. Eggeler and B. Ilschner, "A Parameter for Predicting Creep Rupture Under Multiaxial Stress Conditions," Acta Metallurgica, 37, 1067-1077 (1989).
  53.  G. Eggeler, J. C. Earthman, N. Nilsvang and B. Ilschner, "A Microstructural Study of Creep Rupture in a 12% Cr Steel," Acta Metallurgica, 37, 49-60 (1989).
  54.  J. C. Earthman and W. D. Nix, "Simulations of Stable Crack Propagation Based on Cavity Growth by Coupled Diffusional and Creep Processes," Acta Metallurgica, 35, 1475- 1485 (1987).
  55.  J. C. Earthman and W. D. Nix, "Characterizations of High Temperature Crack Growth in Copper and Copper with 1 wt.% Antimony," Acta Metallurgica, 35, 463-472 (1987).
  56. J. C Earthman, J. C. Gibeling and W. D. Nix, "High Temperature Intergranular Crack Growth Processes in Copper and Copper with 1 wt.% Antimony," Acta Metallurgica, 33, 805- 817 (1985).
Powered by Drupal